2016-2020 Genuine Original Factory Lexus GS200T GS300 GS350 GS450H Facelift OEM Full LED Triple Beam Projector Headlights LHD RHD Headlamp Assembly Ballast (LED Light Control Unit / Module / Controller / ECU / Computer / Starter /Sation / Electronic Unit / Steuergerät /Inverter ) , Adaptive AFS Module , Plastic Lens Cover , Leveling Motor , LED Projector Reflector Bwol , Replacement Sale

Part will fit : Driver side / Passenger side / Left / Light / Front (Fourth generation)

Lexus GS L10 Mk4 : 4-door sedan

Engine
2.0 L 8AR-FTS l4 (turbo)
2.5 L 2AR-FSE l4 (hybrid)
2.5 L 4GR-FSE V6
3.5 L 2GR-FSE V6
3.5 L 2GR-FKS V6
3.5 L 2GR-FXE V6 (hybrid)
5.0 L 2UR-GSE V8 (GS F)
Electric motor
105 kW (141 hp; 143 PS) 1 km synchronous (GS 300h)
147 kW (197 hp; 200 PS) 1 km synchronous (GS 450h)
Power output
131 kW (176 hp; 178 PS) (GS 300h, gasoline engine only); 162 kW (217 hp; 220 PS) (GS 300h, combined system output)
217 kW (291 hp; 295 PS) (GS 450h, gasoline engine only); 256 kW (343 hp; 348 PS) (GS 450h, combined system output)
351 kW (471 hp; 477 PS) (GS F)

If your 2016-2020 Lexus GS200T GS300 GS350 GS450H Full LED Triple Projector Headlight low beam or Headlamp high beam have problems, like light failed failure, flicker , dipped beam very dim dimmer, getting dimmer, not working, flickering blinking , goes one and off , keeps going out , flashlight , making noise , not bright enough , not focused , stopped working , turning yellow and the dashboard displayer have warning light , error code , go up and down , moving up and donw , pointing down , distance control defective , malfuncation ,turning pink , not turning off , gone ping , turned purple ,turned pink , not bright enough , flashing . warning light ,not working properly , keeps burning out , have any other fault issues, you only need to change or replace related original led parts like: ballast, led bulb, control unit module , reflector , igniter , or wire harness cable to repair and fix your led headlamps is ok, no need to cost a lot of money to buy a whole brand new headlight assembly like the car dealer suggest.


Normally speaking, when your headlight have problem, check out the fuse first, if it’s ok, then replace the factory fit led control unit box ballast is ok, because from our many years experience, when the headlight not work, 90% of the problem is on the ballast.