2013-2016 Genuine Original
Factory Fit OEM Mercedes-Benz CLA-Class C117 X117 CLA180
CLA200 CLA220 CLA250 CLA45 AMG Headlights LHD RHD Headlamp
HID D3S Ballast (Xenon Light Control Unit / Module / Controller
/ ECU / Computer / Starter / Electronic Unit / Steuergerät
/Inverter) , D3S Philips Xenon Bulb ,LED DRL LED Turn Light
Control Unit Module , Igniter , Wires Cable Harness , Bulb
Holder Ring , Projector Reflektor Bowls, Plastic Lens Cover
Replacement Sale
Part will fit : Driver side / Passenger
side / Left / Light / Front (First generation)
Mercedes-Benz CLA-Class
Platform C117 : 4-door saloon , 5-door estate
Petrol:
1.6 L M270 turbo I4
2.0 L M270 turbo I4
2.0 L M133 turbo I4
Diesel:
1.5 L OM607 turbo I4
1.8 L OM651 turbo I4
2.1 L OM651 turbo I4
CLA Edition 1 , CLA 180 BlueEFFICIENCY
Edition , Shooting Brake
If your 2013-2016 Mercedes-Benz MB CLA-Class
C117 X117 OEM HID Bi-Xenon Headlight low beam or Headlamp
projector housing high beam have problems, like light failed
failure, flicker , bad , dipped beam very dim dimmer, dimming
, got wet , getting dimmer, not working, flickering blinking
, goes one and off , keeps going out , flashlight , beam
pattern problems , making noise , not bright enough , not
focused , stopped working , turning yellow and the dashboard
displayer have warning light , error code , color inconsistency
, color temperature , go up and down , moving up and donw
, pointing down , overheating , distance control defective
, leveling malfuncation ,turning pink , condensation , not
turning off , gone ping , turned purple ,turned pink , trasig
, not bright enough , flashing . warning light ,not working
properly , adaptive function failure , keeps burning out
, retrofitting challenges , have any other fault issues,
troubleshooting , you only need to change or replace related
original led xenon parts like: repair tips , transformer
ballast, xenon bulb, control unit driver module , reflector
, glare shield , waterproof , igniter , or wiring wire harness
cable to repair and fix your xenon led headlamps is ok,
no need to cost a lot of money to buy a whole brand new
headlight assembly like the car dealer suggest.
Normally speaking, when your headlight have problem, check
out the fuse first, if it’s ok, then replace the factory
fit xenon control unit box ballast is ok, because from our
many years experience, when the headlight not work, 90%
of the problem is on the ballast.
|