2009-2011 Genuine Original
Factory Fit OEM Mercedes-Benz ML-Class W164 X164 ML280 ML300
ML320 ML350 ML420 ML450 ML500 ML550 ML63 AMG Facelift Adaptive
Headlights LHD RHD Headlamp HID D1S AFS Ballast (Xenon Light
Control Unit / Module / Controller / ECU / Computer / Starter
/ Electronic Unit / Steuergerät /Inverter) , D1S Xenon Bulb
, Wires Cable Harness , Bulb Holder Retaining Ring , Projector
Reflektor Bowls, Replacement Sale
Part will fit : Driver side / Passenger
side / Left / Light / Front(Second generation Refresh)
Mercedes-Benz ML-Class
W164 X164: 5-door SUV
Engine
Petrol:
3.5 L M272 E35 V6 (petrol & hybrid)
5.0 L M113 E50 V8
4.6 L M273 E47 V8
5.5 L M273 E55 V8
6.2 L M156 V8
Diesel:
3.0 L OM642 V6 turbo
4.0 L OM629 V8 turbo (2005–2011)
Electric motor 2x AC synchronous electric motors (ML450
Hybrid)
62 kW (84 PS; 83 hp) 1st motor
60 kW (82 PS; 80 hp) 2nd motor
If your Mercedes Benz ML-Class W164 ML280
ML300 ML320 ML350 ML420 ML450 ML500 ML550 ML63 OEM HID Xenon
Facelift Adaptive Headlight low beam or Headlamp projector
housing high beam have problems, like light failed failure,
flicker , bad , dipped beam very dim dimmer, dimming , got
wet , getting dimmer, not working, flickering blinking ,
goes one and off , keeps going out , flashlight , beam pattern
problems , making noise , not bright enough , not focused
, stopped working , turning yellow and the dashboard displayer
have warning light , error code , color inconsistency ,
color temperature , go up and down , moving up and donw
, pointing down , overheating , distance control defective
, leveling malfuncation ,turning pink , condensation , not
turning off , gone ping , turned purple ,turned pink , trasig
, not bright enough , flashing . warning light ,not working
properly , adaptive function failure , keeps burning out
, retrofitting challenges , have any other fault issues,
troubleshooting , you only need to change or replace related
original led xenon parts like: repair tips , transformer
ballast, xenon bulb, control unit driver module , reflector
, glare shield , waterproof , igniter , or wiring wire harness
cable to repair and fix your xenon led headlamps is ok,
no need to cost a lot of money to buy a whole brand new
headlight assembly like the car dealer suggest.
Normally speaking, when your headlight have problem, check
out the fuse first, if it’s ok, then replace the factory
fit xenon control unit box ballast is ok, because from our
many years experience, when the headlight not work, 90%
of the problem is on the ballast.
|