2005-2012 Genuine Original
Factory Fit OEM Mercedes-Benz B-Class B160 B170 B180 B200
Headlights LHD RHD Headlamp HID D1S Ballast (Xenon Light
Control Unit / Module / Controller / ECU / Computer / Starter
/ Electronic Unit / Steuergerät /Inverter) , D1S Philips
Xenon Bulb ,Igniter , Wires Cable Harness , Bulb Holder
Ring , Projector Reflektor Bowls, Plastic Lens Cover , Replacement
Sale
Part will fit : Driver side / Passenger
side / Left / Light / Front(First generation)
Mercedes-Benz B-Class
W245 : 5-door hatchback
Petrol:
1.5 L M266.920 I4
1.7 L M266.940 I4
2.0 L M266.960 I4
2.0 L M266.980 turbo I4
Diesel:
2.0 L OM640 turbo I4
If your Mercedes-Benz MB B-Class W245 B160
B170 B180 B200 OEM HID Bi-Xenon Headlight low beam or Headlamp
projector housing high beam have problems, like light failed
failure, flicker , bad , dipped beam very dim dimmer, dimming
, got wet , getting dimmer, not working, flickering blinking
, goes one and off , keeps going out , flashlight , beam
pattern problems , making noise , not bright enough , not
focused , stopped working , turning yellow and the dashboard
displayer have warning light , error code , color inconsistency
, color temperature , go up and down , moving up and donw
, pointing down , overheating , distance control defective
, leveling malfuncation ,turning pink , condensation , not
turning off , gone ping , turned purple ,turned pink , trasig
, not bright enough , flashing . warning light ,not working
properly , adaptive function failure , keeps burning out
, retrofitting challenges , have any other fault issues,
troubleshooting , you only need to change or replace related
original led xenon parts like: repair tips , transformer
ballast, xenon bulb, control unit driver module , reflector
, glare shield , waterproof , igniter , or wiring wire harness
cable to repair and fix your xenon led headlamps is ok,
no need to cost a lot of money to buy a whole brand new
headlight assembly like the car dealer suggest.
Normally speaking, when your headlight have problem, check
out the fuse first, if it’s ok, then replace the factory
fit xenon control unit box ballast is ok, because from our
many years experience, when the headlight not work, 90%
of the problem is on the ballast.
|